Video
Conferencing IP Address: video.hydromer.com
|
Video
Conferencing IP Address: video.hydromer.com
|
Technical
Data Sheets for
Hydromer Anti-Fog
Coatings
| Product Name |
Type |
Substrate
compatibility |
Curing |
|
| 2098-SG61 (Food Contact) 12% Solids can use our : T-12 Accelerator |
2
part solvent mix |
Glass
(anti-fog & anti-frost) Acrylic, Polycarbonate (PC), Polyester (PET), etc. Compliance to 2002/72EEC, Food Contact >Freezer Doors, etc.< |
110C/60
min., 125C/30 min., 140C/10 min. |
|
| 2266-188 9.8% Solids can use our : T-12 Accelerator |
2
part solvent mix |
Glass
(anti-fog & anti-frost) Acrylic, Polycarbonate (PC), Polyester (PET). etc. >Freezer Doors, etc.< |
110C/60
min., 125C/30 min., 140C/10 min. |
|
| 2098-680G |
waterborne |
Acrylic,
Polycarbonate (PC), Polyester (PET) >Greenhouse Panels< |
110C/60
min., 125C/30 min., 140C/10 min. |
|
| 2098-680C | waterborne | Acrylic, Polycarbonate(PC), Polyester (PET) | 110C/60
min., 125C/30 min., 140C/10 min. |
|
| 2098-39-6
Food Grade 6% Solids Heat Sealable |
waterborne Food Grade |
Low
Density Polyethylene (LDPE), Linear LDPE, Oriented Polypropylene (OPP), Polyester (PET), Styrene, Polyvinylchloride (PVC), Acrylic, Polycarbonate(PC) |
Avg: 22C/ 3 min. |
|
| 2098-39-10
Food Grade 10% Solids Heat Sealable |
waterborne Food Grade |
Low
Density Polyethylene (LDPE), Linear LDPE, Oriented Polypropylene (OPP), Polyester (PET), Styrene, Polyvinylchloride (PVC), Acrylic, Polycarbonate(PC) |
Avg: 22C/ 3 min. |
|
| 2009-68-2 (A & B) 7% Solids can use our : T-12 Accelerator |
2
part solvent mix |
Acrylic,
Polycarbonate (PC), Polyester (PET), (PETG), PolyStyrene, Polyurethane (PU), Polyvinylchloride (PVC) |
Avg: 120C/ 30 min. T-12 / 5 min. |
|
| 2098-506 (A & B) can use our : T-12 Accelerator |
2
part solvent mix |
Acrylic,
Polycarbonate (PC), Polyester (PET), (PETG), PolyStyrene, Polyurethane (PU), Polyvinylchloride (PVC) |
70C+/
30 min T-12 : 110C / 3 min. |
|
| 2234-63 Condensation Control |
waterborne | Aluminum,
Steel, Stainless Steel, other metals |
80C/90
min., 100C/45 min., 120C/30 min. |
|
From:
Hydromer, Inc.
35 Industrial ParkwayBranchburg, NJ USA 08876-3424 |
Contact: Martin von Dyck Executive Vice President 908-722-5000
|
| HYDI.OB OTC
Bulletin Board HDO BSX, |
http://www.hydromer.com E-mail for information |
|
|
